Description
Dent puller are ideal for car dent removal, hail damage dings removal. The paintless dent repair tool great to work for the sheet metal processing of truck, automobile, motorcycle body etc. 
1. Clean the dent with a clean dam cloth and mark it with a marker pen.
2. Load the specialized glue into the hot melt glue gun, andplug it into the electrical outlet to warm up for about 3-5 minutes. (This dent repair kit is come with glue gun and glue tabs, There is a switch on the handle of the glue gun, which needs to be turned on and preheated for 5-8 minutes before the glue flowing out can be used.)
3.Forbridge repair tools, there are gaskets of 13 different sizes for you to choose. Choose a suitable gasket and evenly apply the glue on the gasket by using glue gun ( Notes: Large dents require large gaskets; the larger the gasket, the greater the traction; apply the glue shot by the hot melt glue gun onto the tab as soon as possible and stick it to the dent quicjiy.)
4. Once the glue is applied, stick the gasket into the dent position quickly, and gently press it until the spexialixed glue is glued. (The glue on the tab is in good viscosity for using under the state of a little warm.)
5. Align the hole at the center of bridge to the firmly sticked gasket, insert the nut into the gasket rod and tighten it firmly until the dent removed by pulling.
6. Once the dent is repaired, twist off the nut, remove the bridge and gasket,and then spay the alcohol onto the residual glue on the body, remove the residual glue on the opposite side with spatula. The repair is completed. (Tip: Our dent repair kit can achieve 85-90% repair effect, but it can’t achieve 100% perfect repair effect.)
Note: Due to the complicated operation mode of our product, please read the instruction carefully before using it and follow the instructions. If you have any questions about our product, please feel free to contact with us and we will reply you within 24 hours.
Leave feedback about this